How to Install a Rev-A-Shelf Heavy Duty Mixer Lift

Installation guide

The Rev-A-Shelf heavy duty mixer lift is a spring-loaded mechanism that swings small appliances out of under-counter storage and lifts them to a convenient working height. The lift comes with left and right-hand lifting mechanisms, as well as mounting screws and an appliance storage shelf. Installing the lift requires removing the cabinet door and drawer support and placing the left-hand lifting mechanism just behind the base cabinet framing. The cabinet opening must be at least 12-1/2 inches wide to ensure proper clearance.

The Rev-A-Shelf heavy duty mixer lift is considered one of the best on the market. With a soft-close feature, the lift slides into the cabinet smoothly and quietly.

The Rev-A-Shelf Heavy Duty Mixer Lift is a simple and reliable lift for heavy-duty kitchen mixers. It can be easily installed on a custom-built shelf or a full-height cabinet and comes with adjustable spring tension. The mechanism is designed to lift up to 60 lbs and features built-in shock dampers to prevent the mixer from falling.

To install the heavy-duty mixer lift, the first step is to measure the opening of the cabinet. Make sure to take measurements from top to bottom, side to side, and front to back. Once you know the dimensions, you can proceed to measure the width of the lift. Also, make sure that the shelf is free of obstructions.


The Rev-A-Shelf heavy duty mixer lift is a simple, yet effective solution to the problem of lifting heavy appliances. Featuring a unique spring-loaded lifting mechanism with adjustable spring tension, this device gently raises heavy appliances to cabinet level and then smoothly lowers them back. The lift is designed for maximum stability and comfort with built-in shock-dampening mechanisms. view full pricing can safely lift up to 60 lbs.

Its unique design enables it to accommodate full height cabinets and is considered the industry’s best. It has an adjustable spring tension and comes with built-in shock-dampeners for added safety. The lift is also soft-close for ease of storage.

Rev-A-Shelf heavy duty mixer lifts are designed to lift heavy appliances without damaging the countertop. They feature a spring loaded support system and a built-in shock damper to make lifting heavy appliances a breeze. They can be adjusted to fit a variety of countertop sizes and can even be custom-made to match the color of your cabinets.

The first step in installation is to determine the height of your mixer. how to choose Heavy Duty Car LIfts should be at least 2 inches higher than the mixer itself. To do this, measure the distance between the top mounting brackets. If check it out is greater than this, you’ll have to adjust the spring tension.

Mechanic Superstore
1419 N Midland Blvd, Nampa, ID 83651
Phone: (866) 774-7743

Leave a reply

Footer veresion 1